Beckett 7590 Gas Power Burner Control Manual de usuario

Description / ApplicationsThe Beckett GeniSys Gas Power Burner Control is a safety control designed for use on gas power burners. This control is int

10supply system using a soap and water solution or electronic detection.Check Safety Timings ◦ Turn off gas supply to appliance. ◦ Restore power to th

11GeniSys Gas Power Burner Control Installation and Operation Manualwill shut off and the main gas valve will remain open. ◦ Multiple ignition trials

12Table 3 - Normal LED SequenceLED LED STATE CONTROL STATEAll LEDs off No call for heat or no power to applianceNote: On a call for heat, after the mo

13GeniSys Gas Power Burner Control Installation and Operation ManualTroubleshootingCheck LEDs First - Find the box on the left that matches the LED di

14FLAMEMV STATUSIf the red Status LED and green MV LED are on continuously ▪ Call for heat is active. ▪ Control is powered. ▪ Igniter should be energi

15GeniSys Gas Power Burner Control Installation and Operation Manual ▪ No power to the module. ▪ Check to make sure thermostat or controller is callin

16Troubleshooting Sequence (continued) ▪ If burner fails to light, control will lockout or enter waiting period. ▪ If gas was owing, wait for gas to

17GeniSys Gas Power Burner Control Installation and Operation Manual ▪ Flame is not being proven, control will lockout or enter waiting period. ▪ With

18Page intentionally left blank

19GeniSys Gas Power Burner Control Installation and Operation ManualPage intentionally left blank

2ContentsFeatures...3Specications ...

Form No. 61981-001 R01 , Printed in USA 01/14USA: P.O. Box 1289 ● Elyria, OH 44036Canada: R.W. Beckett Canada, Ltd. ● Unit #3, 430 Laird Road ● Gu

3GeniSys Gas Power Burner Control Installation and Operation ManualTable 1 - Ignition Model NumbersModel Line Model Description Part NumberFeature120

4Environmental Ratings ◦ Operating Temperature Range: -40°F to +175°F (-40°C to +79.4°C). ◦ Relative Humidity Operating Range 5% - 95% (non-condens

5GeniSys Gas Power Burner Control Installation and Operation Manual(3/16” QC)(1/4” QC)IgniterTransformerBurnerMotorGasValveFlame SensorCom Port (COM 1

6Professional Service RequiredIncorrect installation or misuse of this control could result in severe personal injury, death, or substantial property

7GeniSys Gas Power Burner Control Installation and Operation ManualNo User Serviceable Parts• Do not open control.• Do not attempt to replace any co

8Fire or Explosion HazardCan cause severe injury, death, or property damage.Replacement control must be congured to match all timings, settings, and

9GeniSys Gas Power Burner Control Installation and Operation Manualthat help provide status and diagnostic information. Reference Figure 1. The thre